CAPABILITIES LIST

Engine Model No.

TPE331-1-100F TPE331-1-101B TPE331-1-101E TPE331-1-101Z TPE331-1-151A TPE331-1-151G TPE331-1-151K TPE331-2-201A TPE331-1-201C TPE331-2UA-203D TPE331-3U-303G TPE331-3UW-303G TPE331-3U-303V TPE331-3U-304G TPE331-3U-303N TPE331-5-251K TPE331-5-255K TPE331-5-251C TPE331-5-252M TPE331-5-252K TPE331-5-254K TPE331-5-252D TPE331-5A-252D TPE331-6-251M TPE331-6-252M TPE331-6A-252M TPE331-6-252B TPE331-6-253B TPE331-6A-251M TPE331-8-401S TPE331-8-402S TPE331-8-403S

Engine Model No.

TPE331-8-404S TPE331-8-406S TPE331-8-422S TPE331-8-423S TPE331-8-426S TPE331-10AV-511B TPE331-10AV-511M TPE331-10N511S TPE331-10N512S TPE331-10N513S TPE331-10N514S TPE331-10N515S TPE331-10U501G TPE331-10U-502G TPE331-10U-511G TPE331-10U-512G TPE331-10-501C TPE331-10R-501C TPE331-10R-502C TPE331-10-511C TPE331-10R-511C TPE331-10R-513C TPE331-10-501M TPE331-10-511M TPE331-10-501K TPE331-10-511K TPE331-10U-503G TPE331-10U-513G TPE331-10UF-501H TPE331-10UF-511H TPE331-10UF-512H TPE331-10UF-513H

Engine Model No.

TPE331-10UR-513H TPE331-10UG-513H TPE331-10UGR-513H TPE331-10UG-514H TPE331-10UGR-514H TPE331-10UA-511G TPE331-25AA TPE331-25DA TPE331-25FA TPE331-43A TPE331-47A TPE331-25AB TPE331-25DB TPE331-43BL TPE331-55B TPE331-11U-601G TPE331-11U-602G TPE331-11U-611G TPE331-11U-612G

Test Cell
Hancock Enterprises, Inc.
offers a digitalized prop stand test cell unit.

  • Each completed engine undergoes a full operational check prior to shipment

  • Included are torque setting determinations with calibrated Lebow Equipment.

Depending on the work scope we are equipped to perform with our Computer – based Recompensation Equipment.

These fine line tests and setups insure that each engine delivered to customer meets the highest standards of performance in the field.

Training
Hancock Enterprises Inc. offers the following:

Fam Course a brief training syllabus that can help a pilot or mechanic receive a good introduction to the TPE 331 Turboprop systems and operation. This course can be custom tailored to fit the operator’s particular needs.

Field Level Engine Maintenance Course that is tailored to the line mechanic or a pilot that has a good mechanical knowledge. This course can be customized to fit the operator’s needs and or requests

On The Job training course is offered to the operator that needs special attention in a particular area that they have requested.

Refresher is a training course that gives special attention to the line mechanic or pilot that requests additional training in a certain area of the Field Level Maintenance course that they have previously taken.

top
For information about our services, contact us by telephone at (615) 391-0606
(in Tennessee) or our nationwide toll-free number (800) 331-4217. Or, if you prefer, send us an email note at rrhancock@hancockenterprises.com

Web Design & Maintenance by: ArtTech Creative Services